How to Connect Dodo Go Hub to Your ADSL Service?

It’s not a tough task to configure Dodo modem if you’ll know the proper procedure. If you are also having trouble while configuring or connection you Dodo Go Hub Modem to your ADSL Service then this blog can be helpful to you. In order to connect your Dodo modem to your ADSL, go through this blog thoroughly and follow the below steps as mentioned. Before starting with the process, you’ll need to understand the indication of different lights on your modem which is as follows:

1. Solid Green or Solid Red light on Status LED indicates Power on and Modem is initializing mode respectively.
2. On the Broadband LED, no light indicates No DSL Signal, Solid Green light indicates Device has connected to the Internet and Solid Red light indicates DSL Signal Established but failed to connect to the Internet.
3. No lights on the Phone LED indicates No VoIP connection and Solid Green and Solid Red light describes Established connection to VoIP Network and Failed to connect to VoIP Network.
4. Now in order to connect your modem to your ADSL Service first connect the network cable to the computer and then to the modem port LAN1.
5. After that connect the ADSL splitter filter to the telephone socket and then connect the telephone cable to the modem ADSL port.
6. The other end of the telephone cable should be connected to ADSL/Modem port on the splitter filter.
7. After making all these connections, leave it for 15 minutes for the modem to communicate with the servers and retrieve the login details.
8. After a few minutes when the modem would have made the connection to your ADSL service successfully, you’ll notice the green light on Status and Broadband LED.

You have successfully connected and configured your Dodo Go Hub to the ADSL service. In case, you are facing any issue with your Dodo plan or modem, visit www.dodo.com/setup @ +61-1800-958-237 for the finest assistance possible.

Also, Read This Blog: How to Setup Dodo Alcatel AL2100T for On Windows?